
How much power does an LED wall use?
An LED wall’s power use depends on its size, pitch, brightness and what it shows. Spec sheets give two figures per square metre: the average, which sets your electricity bill, and the maximum, a full-white picture at full brightness, which sets the cabling, breakers and supply you need. Everyday content uses roughly a third of the maximum.
Power per square metre, by pitch
| Pitch | Average | Maximum | Average per sq ft |
|---|---|---|---|
| P1.25 | 150 W/m² | 450 W/m² | about 14 W |
| P1.56 | 180 W/m² | 540 W/m² | about 17 W |
| P1.86 | 180 W/m² | 540 W/m² | about 17 W |
| P2.5 | 200 W/m² | 600 W/m² | about 19 W |
| P2.6 | 200 W/m² | 600 W/m² | about 19 W |
| P2.91 | 220 W/m² | 650 W/m² | about 20 W |
| P3.91 | 200 W/m² | 650 W/m² | about 19 W |
| P4.81 outdoor | 250 W/m² | 750 W/m² | about 23 W |
Typical figures for the screens we supply; your quotation comes with the chosen model’s own spec sheet. Outdoor screens run brighter by day, so they use more power in daylight than at night.
Worked examples
- Boardroom wall, P1.86, 8 × 4.5 ft (3.3 m²): about 0.6 kW on average and 1.8 kW at most. Run 10 hours a day, it uses about 6 units (kWh) a day.
- Banquet hall screen, P2.5, 16 × 9 ft (13.4 m²): about 2.7 kW on average and 8 kW at most. A six-hour function uses about 16 units.
- Outdoor screen, P4.81, 20 × 10 ft (18.6 m²): about 4.6 kW on average and 14 kW at most. Twelve hours a day uses about 56 units a day.
For the running cost, multiply the units by your tariff. At an illustrative ₹9 a unit, the banquet hall screen costs about ₹145 for a six-hour function.
Planning the electrical supply
Size the supply for the maximum, not the average. A 230 V single-phase circuit carries roughly 230 W per amp, so a wall with a 7 kW maximum needs about 30 A, normally split over several circuits. Larger walls are usually fed from a three-phase supply with a dedicated distribution board, proper earthing and surge protection. We check all of this at the site survey; see LED wall installation.
How to cut an LED wall’s power use
- Set the brightness for the room: indoor screens rarely need full brightness, and every step down saves power and LED life.
- Use a light sensor or a brightness schedule on outdoor screens so they dim at night.
- Dark backgrounds draw less than full white.
- Switch the wall off on a timer when the venue is closed instead of leaving it on standby.
- Ask whether the model uses common-cathode LEDs, which run cooler and use less power for the same brightness.
Work out the power of your own wall with the LED wall calculator.
Common questions
How much electricity does an LED wall use per day?
Multiply its area in m² by the average watts per m² and the hours it runs. A 16 × 9 ft P2.5 wall (about 13.4 m² at 200 W) running six hours uses about 16 units (kWh).
Does an LED wall use more power than a projector?
Usually yes, because it is much bigger and brighter: a large LED wall draws a few kilowatts on average, a projector a few hundred watts to a kilowatt or two. In return, the LED wall stays clear with the lights on.
Does an LED wall need three-phase power?
Small walls can run on single-phase circuits. Walls with a maximum draw above about 7 – 8 kW are usually fed from a three-phase supply. We work this out from the screen’s maximum power at the site survey.
More guides
Tell us about your space
Share a few details and our team will call you to plan a site survey, in Kolkata or anywhere in East and North-East India.
- Free advice on pitch, size and brightness
- Branded or imported panels to suit your budget
- Installation and AMC by our own team