
Types of LED display, compared: SMD, COB, GOB, transparent, flexible and more
The short answer: most LED walls are SMD, which is affordable and easy to repair. COB is the premium choice for fine pitch and close viewing. GOB is SMD with a protective coat. Transparent, flexible, floor and poster LEDs are special formats for glass, curves, floors and portable displays.
All the types at a glance
| Type | How it is built | Strengths | Watch out for | Best for |
|---|---|---|---|---|
| SMD indoor | Separate LED packages soldered on the module | Mature, affordable, easy to repair pixel by pixel | Pixels can be knocked off at low height | Showrooms, halls, auditoriums |
| SMD outdoor | SMD with sealed, IP65 cabinets | Bright (4,500+ nits), weatherproof | Heavier; needs a proper structure | Shop fronts, facades, billboards |
| DIP | Older through-hole LEDs | Very bright and tough | Coarse pitch only; mostly replaced by outdoor SMD | Old highway billboards |
| COB | Bare chips on the board under a resin layer | Finest pitches, sealed surface resists knocks and dust | Costlier; repairs are module by module | Boardrooms, control rooms, studios |
| GOB | SMD module with a clear glue coating | Protects SMD from knocks and moisture | Coating can slightly dull blacks and colour | Hire walls, floors, low-mounted screens |
| Transparent LED | LED strips with open gaps between them | You can see through it; light and slim | Lower resolution; content needs dark backgrounds | Glass facades, showroom windows, stage scenery |
| LED film | Thin transparent film stuck on glass | Very light; keeps the view out | Lower brightness than cabinets | Retail windows, glass partitions |
| Flexible LED | Soft modules that bend | Wraps columns and curves | Needs a custom frame | Pillars, curved counters, creative stages |
| Floor LED | Load-rated tiles with a tough surface | Walk-on visuals, can be interactive | Load rating and anti-slip surface | Launches, fashion shows, dance floors |
| LED poster / standee | A ready-made portable panel with player | Plug in and play; easy to move | Fixed size | Shop entrances, exhibitions, lobbies |
| All-in-one LED | A giant LED "TV" with a built-in controller | Quick to install, simple to use | Fixed sizes, usually 110 to 220 inches | Boardrooms, training rooms |
COB vs SMD
In an SMD screen, every pixel is a small package soldered onto the module. In a COB screen, the bare LED chips are mounted straight onto the board and sealed under a resin layer. COB can reach finer pitches, below 1 mm, and the flat sealed surface stands up to knocks, dust and moisture. SMD remains cheaper and can be repaired down to a single LED. For a boardroom wall people walk past and touch, COB is worth the cost. For a banquet hall wall above head height, SMD is the sensible choice.
GOB: SMD with armour
GOB (glue on board) is not a different LED. It is an SMD module covered with a clear glue layer. It protects hire walls that are rigged and packed every week, and screens mounted low where people touch them. The coating can make blacks look slightly grey, so compare a GOB and a plain SMD module side by side before you buy.
Transparent LED and LED film
Transparent LED is built from strips with open gaps, so you can still see through it. It suits glass facades, showroom windows and stage scenery where you want a picture without a solid wall. LED film is thinner still and sticks directly onto glass. Both have lower resolution than solid walls, so content works best with bold images on a dark background.
Indoor vs outdoor
Outdoor screens need about five times the brightness of indoor ones and IP65 sealing against rain and dust. See our indoor vs outdoor guide.
Hire cabinets vs fixed cabinets
| Hire (event) cabinet | Fixed (installation) cabinet | |
|---|---|---|
| Usual size | 500 × 500 or 500 × 1000 mm | 640 × 480, 960 × 960 mm or custom |
| Frame | Die-cast aluminium, quick locks, curve locks | Steel or aluminium frame, wall-mounted |
| Built for | Being rigged, flown and packed again every few days | Running every day in one place for years |
| Usual pitches | P2.6, P2.9, P3.91, P4.8 | P1.5 to P10 |
| Service | Front and rear | Front service for walls fixed flat to a wall |
Which type for your space
- Boardroom: COB P1.5 or fine-pitch SMD. See P1.5 COB walls.
- Showroom or jewellery store: SMD P2.5 or P1.86, or transparent LED in the window. See LED for shops.
- Banquet hall or auditorium: SMD P2.5 to P3. See LED for halls.
- Facade or shop front: outdoor SMD P3 to P5, or transparent LED on glass. See outdoor LED.
- Events: hire cabinets, with GOB or floor LED for special set pieces. See LED wall rental.
Compare pitches in the pixel pitch guide, or see LED wall specifications.
Common questions
What is the difference between COB and SMD LED?
SMD uses separate LED packages soldered on the board; COB places bare chips on the board under a resin layer. COB reaches finer pitches and resists knocks, but costs more. SMD is cheaper and easier to repair.
What is a GOB LED screen?
A GOB screen is an SMD screen with a clear glue layer over the LEDs. The layer protects against knocks and moisture, which suits hire walls and screens mounted low.
Is a transparent LED screen worth it?
For a glass facade or a showroom window, yes: it shows bright content while keeping the view and daylight. It is not a replacement for a solid LED wall where you need fine detail.
What is the difference between SMD and DIP LED?
DIP is the older through-hole LED used in early outdoor billboards. Outdoor SMD has replaced it for most screens because it allows finer pitch and better colour.
More guides
Tell us about your space
Share a few details and our team will call you to plan a site survey, in Kolkata or anywhere in East and North-East India.
- Free advice on pitch, size and brightness
- Branded or imported panels to suit your budget
- Installation and AMC by our own team