LED walls, sound and lighting installations · Kolkata, East and North-East India+91 62913 84020 · WhatsApp
LED walls · Kolkata and East India

LED walls and LED screens for sale in Kolkata

Indoor video walls, outdoor screens and billboards, shop-window displays and permanent stage walls for halls, supplied as branded or imported panels and installed by our own crew.

18,000
sq ft of LED walls soldto dealers, stores and hotels
4,800+
sq ft of LED we ownkept in our Tangra warehouse
29
years in AVin Kolkata since 1997

Work out your LED wall

Change the size and use to see the screen area, a starting price, the right pitch for your viewers and the picture size.

Screen area60 sq ft
Screen starts fromGST, controller, structure and installation extra
Suggested pitch
Picture size
Up close

What you are buying, pixel by pixel

An LED wall is thousands of red, green and blue LEDs on modules, built into cabinets and joined into one seamless screen. How closely those LEDs are spaced, how bright they are and how they are protected decide what the wall costs and where it works.

Anatomy

How an LED wall is built

Each LED holds a red, a green and a blue chip. Hundreds of them sit on a module, commonly 320 × 160 mm. Modules, a power supply and a receiving card fit into a cabinet, and cabinets lock together into a wall of almost any size.

A video processor takes your laptop, camera or media player input and maps it across the wall. For signage, a small player with Wi-Fi, 4G or USB plays scheduled content on its own.

Diagram: LED, module, cabinet and complete LED wall
Inside a cabinet

What sits behind the screen

Every cabinet carries its own power supply and receiving card, with power and data looped from one cabinet to the next. Die-cast aluminium cabinets are light, flat and quick to align; steel cabinets are used for large outdoor screens.

Front-service cabinets let modules come out from the front, so a wall can sit flat against your wall with no access space behind it.

Diagram: rear of an LED cabinet with power supply, receiving card, handles and connectors
Technology

SMD or COB?

SMD screens use LEDs in individual packages. They are the most common, cost less and are easy to repair module by module. COB (chip on board) seals the LEDs under one resin layer: tougher against knocks and dust, deeper blacks and the finest pitches, at a higher price. GOB adds a protective glue coat over SMD LEDs, a middle path for screens people can touch.

Illustration: SMD and COB LED surfaces compared
Pixel pitch

Sharper is not always better

The pitch is the distance between pixels in millimetres. Halve the pitch and you get four times the LEDs in the same area, and a much higher price. Pay for the pitch your viewers need: as a rule, the closest viewer should be at least as many metres away as the pitch number.

Illustration: the same patch of screen at P1.5, P2.5, P4 and P10
Shapes and mounting

LED walls in every format

Flat, wall-mounted

The most common: fixed to a wall or a steel frame, for lobbies, showrooms and halls.

Floor-standing

On its own base frame, for stages and spaces where the wall cannot take the load.

Hanging (flown)

Suspended from the ceiling or truss, for atriums and auditoriums.

Curved and corner

Concave, convex or wrapped around a corner, using curved or angled cabinets.

LED poster and standee

Free-standing, plug-in screens for entrances, counters and malls.

Outdoor billboard and facade

Weatherproof screens on poles, rooftops and building fronts.

Installations

Where LED walls go

Starting prices

LED wall prices at a glance

Indicative starting prices for the screen. Every quotation is prepared after a site survey.

ProductPixel pitchBest forStarting from
Indoor LED wallP2.5Showrooms, banquet halls, auditoriums, lobbies₹5,600 / sq ft
Indoor fine-pitch LED wallP1.86 – P2Boardrooms, close viewing, jewellery stores₹8,300 / sq ft
Indoor ultra-fine COB LED wallP1.5 and belowBoardrooms, control rooms, studios₹15,700 / sq ft
Outdoor LED screenP3.9 – P5Shop fronts, building facades, mall atriums₹7,300 / sq ft
Outdoor LED billboardP6 – P10Highways, rooftops, stadiums, large hoardings₹6,700 / sq ft

Starting prices for the LED screen (cabinets and modules), per square foot. GST, the controller or video processor, mounting structure, power cabling, transport and installation are quoted separately after a site survey. Final prices depend on brand, pitch, size and site.

Choosing the pitch

Which pixel pitch do you need?

A rule of thumb: the closest viewer should be at least about as many metres away as the pitch number in millimetres.

Pixel pitchComfortable viewing distanceTypical use
P1.5 and belowFrom about 1.5 mBoardrooms, control rooms, broadcast studios
P1.86 – P2From about 2 mMeeting rooms, retail counters, premium lobbies
P2.5From about 2.5 mShowrooms, banquet halls, auditoriums, restaurants
P3.9 – P5From about 4–5 mShop fronts, facades, large halls, mall atriums
P6 – P10From about 6–10 mBillboards, highways, stadiums, rooftops
Specs explained

What the numbers on a spec sheet mean

Pixel pitch (P)
Distance between pixels in millimetres. Smaller pitch = sharper up close, more LEDs, higher price.
Brightness (nits)
Indoor walls need 600 – 1,000 nits; screens facing sunlight need 5,000 nits or more.
Refresh rate (Hz)
3,840 Hz and above avoids flicker and lines when the screen is filmed on phones or cameras.
Grey scale (bit)
How many shades each colour can show. 14 – 16 bit gives smooth gradients at low brightness.
IP rating
Protection from dust and water. Outdoor screens need IP65 on the front and the back.
SMD, COB and GOB
SMD: each LED in its own package. COB: LEDs sealed under one resin layer. GOB: SMD with a protective glue coat.
Front or rear service
Front service lets modules come out from the front, so the screen can sit flat on a wall.
Video processor
The box that takes your HDMI or other input and maps it to the wall, scaling and switching sources.
Our own LED

Our LED, at work

Every screen here is from our own 4,800+ sq ft of LED, rigged by our own crew. The same stock goes into fixed installations on monthly rent.

Not ready to buy?

Take the LED wall on monthly rent

We install an LED wall from our own 4,800+ sq ft stock on your premises. You pay a monthly rent with maintenance included, month to month, and can upgrade it or buy it out later.

See fixed installation
How it works

From site survey to handover

  1. Site surveyWe visit, measure the wall, check the structure, power and viewing distance, and understand what you will show on it.
  2. Recommendation and mock-upYou get the right pitch, size, brightness and a mock-up of the screen on your wall, with options for branded or imported panels.
  3. SupplyPanels, controller, processor and accessories are supplied to suit your budget and the brand you choose.
  4. InstallationOur crew builds the mounting structure, installs the cabinets, runs power and data, and calibrates colour and brightness.
  5. Training and handoverYour team learns to switch it on, change content and schedule playlists.
  6. AMC and supportOptional annual maintenance with checks, cleaning, spare modules and repairs.
Why Solutions AV Systems

Bought from people who run LED walls for a living

29 years of running LED walls

We have rigged and run LED walls since long before we sold one. We have sold 18,000 sq ft of LED walls to dealers, stores and hotels, and own more than 4,800 sq ft that we maintain ourselves, so we know what fails and why.

Branded or imported, to your budget

We supply branded panels or quality imported panels, and explain the difference in brightness, warranty and service honestly.

Survey before quotation

Pitch, size and brightness are chosen after measuring your site and viewing distance, not from a catalogue.

Local service team

Installation, AMC and repairs are handled by our own team based in Kolkata, serving East and North-East India.

  • The Park Hotel
  • The Lalit Great Eastern Kolkata

Worked with us?

Tell others how it went. It takes a minute on Google.

Questions

Frequently asked questions

What types of LED walls do you sell?

Indoor LED video walls from P1.5 to P2.5, outdoor LED screens from P3.9 to P10, LED poster displays and fine-pitch walls for boardrooms, as branded or imported panels.

How much does an LED wall cost?

Indoor P2.5 LED walls start from about ₹5,600 per sq ft for the screen, and outdoor screens from about ₹6,700 per sq ft. Controller, structure, installation and GST are quoted after a site survey.

Do you install the LED wall as well?

Yes. Our own crew surveys the site, builds the structure, installs and calibrates the screen and trains your staff.

Which areas do you supply LED walls to?

Kolkata and West Bengal, Odisha, Bihar, Jharkhand, Assam and the North-Eastern states.

Is SMD or COB better?

SMD is the common, cost-effective choice and easy to repair. COB is tougher and suits the finest pitches and screens people may touch, at a higher price. We recommend one after seeing your site.

Can I rent an LED wall long term instead of buying?

Yes. With fixed installation we install an LED wall from our own stock and you pay a monthly rent, month to month, with maintenance included.

Get a quote

Tell us about your space

Share a few details and our team will call you to plan a site survey, in Kolkata or anywhere in East and North-East India.

  • Free advice on pitch, size and brightness
  • Branded or imported panels to suit your budget
  • Installation and AMC by our own team